Idro 2k

Two component waterborne finish

Two component polyurethane waterborne finish. In the “natural wood effect” version, IDRO 2K confers a natural appearance to floors together with a uniformity and cleanliness that can only be compared to the results achieved with impregnation cycles with oil and/or wax. Apart from these features regarding appearance, IDRO 2K combines qualities of resistance to abrasion and to rubber marks never before achieved by waterborne products so it is even recommended for use on heavy duty flooring (in salons, shops, etc.). If it is applied directly without a sealer, it brightens up the colour of the wood quite considerably, without leading to yellowing over time.

TECHNICAL NOTES
Catalysis ratio (vol/vol)
10:1
Dry for sanding (hours)
12
Overcoating without sanding (hours)
After 3, within 5
Degree of gloss 2K (gloss)
10
Degree of gloss 2K EXPORT (gloss)
30
Degree of gloss 2K SAT (gloss)
50
idro 2k
FEATURES
Low environmental impact certified EC1
Extraordinary chemical and mechanical resistance
100% PU
Minimizes any finishing defects
Exceptional transparency
Unbeatable “natural wood” effect (Matte version)