This page uses cookies. By viewing our website, you are consenting to the use of cookies.
For further information concerning the use of cookies on this website, please click on “Further information”.

 

Primer SF

Single component polyurethane solvent-free primer
Single component polyurethane moisture-cure primer that is water and solvent-free for treating subfloors before laying wood floors.

Single component polyurethane moisture-cure primer that is water and solvent-free for treating subfloors before laying wood floors. The low level viscosity and the excellent penetration make it ideal for strengthening and waterproofing concrete and anhydrite screeds with a high level of moisture up to a maximum of 5% M.C. (up to 2.8% M.C. with just one coat). It is recommended especially for screeds with built-in heating. Moreover, the absence of solvents makes it safe for transportation and storage (nonflammable product) and when applied (odourless, it can also be used in the vicinity of rooms that are in use). Compared with products containing water, PRIMER SF offers a much higher coverage and does not increase the humidity of the screed.

TECHNICAL DATA SHEET
CERTIFICATION EC1
FLYER

Primer UR 50

Single component polyurethane primer
Single component polyurethane moisture-cure MDI-free primer for treating subfloors.

Single component polyurethane moisture-cure MDI-free primer for treating subfloors. The main characteristic of this product is its versatility. In fact it can be used to restore uneven concrete subfloors, to treat crumbly screeds, to accelerate laying times in the case of subfloors with a high level of residual humidity (up to a maximum of 5% M.C.) and as a binder for the preparation of synthetic mortars for fast repairs.

TECHNICAL DATA SHEET

Primer EPO 2

Two component epoxy primer
Two component water and solvent-free epoxy primer for treating subfloors.


Two component water and solvent-free epoxy primer for treating subfloors. It can be used to treat crumbly screeds or screeds with a high level of residual humidity up to a maximum of 5% M.C., as well as being suitable as a binder for the preparation of synthetic mortar for quick repairs.

TECHNICAL DATA SHEET
 

Primer EPO 3

Three component epoxy primer
Product based on acrylic resins in a watery dispersion specially formulated to strengthen flaking or crumbly subfloors.

Product based on acrylic resins in a watery dispersion specially formulated to strengthen flaking or crumbly subfloors.

TECHNICAL DATA SHEET

Primacril

Silicate based primer

Product based on acrylic resins in a watery dispersion specially formulated to strengthen flaking or crumbly subfloors.

TECHNICAL DATA SHEET

Primer K

Silicate based primer

Product based on silicates in a watery solution specially formulated for strengthening concrete subfloors and crumbly or flaking cement plastering.

TECHNICAL DATA SHEET

Primer NP

Nanostructured acrylic primer
Primer NP

Single component nanostructured acrylic primer in watery dispersion. PRIMER NP guarantees a high level of penetration in any substrate, even those with little absorption and is ideal as a dust remover and strengthener for cement surfaces, for smoothing cementitious floors, anhydrite screeds and similar. Entirely solvent-free and without any hazard or danger labels or symbols, it is ideal for subfloors with in-built heating and/or cooling. It enables subsequent gluing with single or two component reactive adhesives.

TECHNICAL DATA SHEET

Fetless

Adhesion improver
A solvent and compound based product for improving the adhesion of two-component adhesives on enamelled or glazed surfaces such as: marble, ceramic and terrazzo tiles, etc.

A solvent and compound based product for improving the adhesion of two-component adhesives on enamelled or glazed surfaces such as: marble, ceramic and terrazzo tiles, etc.

TECHNICAL DATA SHEET

Rasoself

Pre-mixed self-levelling, reinforced cement
Pre-mixed, self-levelling, fibre-reinforced cement that sets quickly for smoothing uneven horizontal subfloors and for laying wood floors, carpet, rubber, PVC, ceramic tiles and natural stone quickly.

Pre-mixed, self-levelling, fibre-reinforced cement that sets quickly for smoothing uneven horizontal subfloors and for laying wood floors, carpet, rubber, PVC, ceramic tiles and natural stone quickly. It can be used to create thicknesses up to 40 mm in just one coat leading to a considerable saving in time while being simple to use. RASOSELF makes any new or pre-existing concrete screed perfectly flat correcting differences of thickness from 3 to 40 mm in just one coat. RASOSELF can be used in houses, factories as well as in places subject to heavy traffic, both indoors and out, on cement subfloors and poured or ready mixed concrete subfloors.

TECHNICAL DATA SHEET

Sabbia di quarzo

Fine quartz sand
Quartz sand with a controlled particle size, perfectly washed and dried.

Quartz sand with a controlled particle size, perfectly washed and dried.

Repox

Two component epoxy polyurethane adhesive
The latest generation of two component epoxy polyurethane adhesive for gluing wood floors of any size on cement subfloors, even heated ones, and non-absorbing subfloors (ceramic tiles, stoneware, marble, etc.) and ideal for laying solid,engineered and planks wood floors.

The latest generation of two component epoxy polyurethane adhesive for gluing wood floors of any size on cement subfloors, even heated ones, and non-absorbing subfloors (ceramic tiles, stoneware, marble, etc.) and ideal for laying solid,engineered and planks wood floors. A real evolution: REPOX asserts itself in a new version with an improved rheology making it easier to spread and leading to a perfect ridge height.
REPOX is outstanding for the fact that it is almost insensitive to changes in temperature (seasonality), completely odourless both before and after mixing and offers excellent hold and wettability under any environmental condition. The high coefficient of elasticity after hardening completes the features of the REPOX revolutionary adhesive together with its unbeatable characteristics of adhesion and toughness.

TECHNICAL DATA SHEET

Monosil

Single component silane-terminated adhesive
Single component silane-terminated moisture-cure adhesive. MONOSIL does not contain water, solvents, isocyanates, epoxy or amino compounds or heavy metals (tin) and consequently does not bear any health or risk warnings or symbols.

Single component silane-terminated moisture-cure adhesive. MONOSIL does not contain water, solvents, isocyanates, epoxy or amino compounds or heavy metals (tin) and consequently does not bear any health or risk warnings or symbols. MONOSIL has excellent adhesion characteristics on all subfloors as well as permanent elasticity. These characteristics make it the ideal adhesive for laying engineered and traditional solid wood floors of average size on all subfloors, with or without underfloor heating. MONOSIL does not harm the coating of pre-finished wood floors and for this reason does not leave any marks; other features of this adhesive are the ease with which it can be worked, the high level coverage, resistance to water and the capacity to absorb sound leading to a considerable improvement in the comfort of the environment with regard to noise levels.

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET
CERTIFICATION EC1  
FLYER

Revin X

Single component vinyl adhesive
Single component adhesive in dispersion with a low water content for gluing wood floors including those of medium sized floorboards with a thickness of 14/17 mm on concrete subfloors with a moisture content of 2% or less or on other absorbing subfloors.

Single component adhesive in dispersion with a low water content for gluing wood floors including those of medium sized floorboards with a thickness of 14/17 mm on concrete subfloors with a moisture content of 2% or less or on other absorbing subfloors. The floors glued with REVIN X have excellent bonding, adhesion and permanent elasticity.

TECHNICAL DATA SHEET

Revin LL

Single component vinyl adhesive
Transparent vinyl adhesive in a watery dispersion suitable for gluing the heads of solid wood flooring without interlocking to reduce “sliding” during the laying phases.

Transparent vinyl adhesive in a watery dispersion suitable for gluing the heads of solid wood flooring without interlocking to reduce “sliding” during the laying phases. Compared with traditional vinyl adhesives, this product offers the undoubted advantage of being completely transparent after drying. It is also recommended as a highly resistant adhesive for gluing wood profiles and all wooden materials in general.

TECHNICAL DATA SHEET

Revin B3

Class D3 single component adhesive
Single component adhesive in a watery dispersion for gluing engineered wood floors and floating laminate floors. When dry, the bonding achieves D3 class resistance to water (according to EN 204).

Single component adhesive in a watery dispersion for gluing engineered wood floors and floating laminate floors. When dry, the bonding achieves D3 class resistance to water (according to EN 204).

TECHNICAL DATA SHEET

Polifoam

Expanding polyurethane resin
Single component expanding polyurethane moisture-cure resin that is SOLVENT-FREE for gluing planks that are not perfectly anchored to the subfloor.

Single component expanding polyurethane moisture-cure resin that is SOLVENT-FREE for gluing planks that are not perfectly anchored to the subfloor. The expansion characteristic of the product enables it to penetrate inside all the cavities between the screed and the wood leading to a strong, lasting bond and eliminating any annoying “hollow” sound.

TECHNICAL DATA SHEET

Quick stop

Waterborne quick setting adhesive
QUICK STOP is a single component waterborne adhesive for gluing operations requiring an immediate and very firm setting.

QUICK STOP is a single component waterborne adhesive for gluing operations requiring an immediate and very firm setting. It is ideal for gluing vertical skirting, beading etc. as long as one of the two surfaces is absorbent. QUICK STOP sets very well on concrete, stone, brickwork, ceramic tiles, wood and polystyrene.
QUICK STOP glues with a very strong, long lasting hold. It features a high solid content, excellent thixotropy and strong initial setting.

TECHNICAL DATA SHEET

Gap Filler

Coloured acrylic sealer
GAP FILLER is an acrylic sealant in a solvent-free watery dispersion for wood and laminate floors. Available in the colours WHITE, MAPLE, OAK, DOUSSIÉ, MEDIUM WALNUT, DARK WALNUT and WENGÉ.

GAP FILLER is an acrylic sealant in a solvent-free watery dispersion for wood and laminate floors.
Available in the colours WHITE, MAPLE, OAK, DOUSSIÉ, MEDIUM WALNUT, DARK WALNUT and WENGÉ.

TECHNICAL DATA SHEET

Vermeister Vermeister